1. Read SETTINGS and OBJECTIVE

2. Start the LASERHIT app and proceed to FREE TARGET practice

3. Edit the FIRING RANGE SETUP accordingly

4. Start practicing and follow the OBJECTIVE

• Target Type: Custom

• Target Scale: 1:1 to 1:100

• Practice: FREE TARGET

FIRING RANGE SETUP

• Settings Level: ADVANCED

• Firing Distance: 5 yards to Custom

• Units: INCH/CM/SMOA/TMOA/MIL/MRAD

On-Screen Results

• Group: Hide

• Windage-Elevation,inch: Show

Virtual Spotter: Hit Placement

Target Settings

• Vital Zone Radius, inch: 3 or Custom

Common Settings

• Hits, max.: 3 or Custom

• Timeout, sec.: 180 sec or Custom

DISCLAIMER - PRACTICE ON YOUR OWN TERMS

Use any LASERHIT target or your own custom target (see Note [1]).

OBJECTIVE

Execute a series of dry-fire shots to an exact point of aim defined by the center of the crosshair using your own target or any LASERHIT target. Range, shot count, and time limits are user-defined (see Notes [2]).

GOAL

Your target, your distance, your measurement standards. Focus on exact point-of-aim placement. Each shot is evaluated by its offset from the crosshair center.

WHAT YOU NEED

Your own target and a LASERHIT Reload Mark, plus a LASERHIT Training Kit.

Alternatively, print free LASERHIT targets and use your own laser cartridge or laser training device with a smartphone mounted on a tripod (see Note [3]).

NOTES

[1] When using your own targets, use a solid, dark target surface for reliable detection. A LASERHIT Reload Mark is required and can be downloaded for free from laserhit.com/targets. Set the correct Target Scale during Firing Range Setup before starting the drill.

[2] Firing Distance is the actual indoor distance. Simulated Distance calculated automatically based on target scale before training begins.

[3] Follow all dry-fire safety rules applicable to indoor training.

YOUR RULES

Set the Target Scale from 1:1 to 1:100 and combine it with a Firing Range from 1 yard to 17.6 yards to recreate your training distance up to 1 mile.

Choose your preferred measurement units: linear or angular.

Turn Hit announcements On or Off.

Set the Vital Zone radius to define your acceptable Vital Hit Zone area.

Set up to 99 shots per Stage.

Set the Stage time limit up to 5 minutes.

‍ ‍

DRILL DETAILS

Shooting mastery develops in three distinct steps, taken in a specific order: Precision, Accuracy, and Timing. Precision defines how tight and consistent a shot group is. Accuracy defines how precisely each shot lands at the intended point of aim. Timing defines how efficiently precision and accuracy can be executed under speed or pressure.

This drill is dedicated entirely to the second step: accuracy. It evaluates how closely each shot lands relative to the intended point of aim, independent of group shape or speed.

The Custom Accuracy drill exists to measure and develop exact point-of-aim control without imposing a fixed standard. You define the target, distance, scale, measurement units, and acceptable offset. LASERHIT calculates deviation, consistency, and progress based on the crosshair reference.