Practical Precision

Goal: group < 6 inch at 25 yards, 3 shots

    • Practice: FREE TARGET • ADVANCED

    • Target: LASERHIT B3

    • Target Scale: 1:10

    • Firing Range: 2.5 yards

    • Stage: 3 shots

    • Goal: Group < 6-inch

  • DISCLAIMER

    Custom targets are supported. See Notes [3] for requirements.

    OBJECTIVE

    Fire three shots at center mass. Time limit: 3 minutes. Range: 25 yards (see Notes [1]).

    GOAL

    Achieve a group under 6 inches at 25 yards. Accountability before speed.

    WHAT YOU NEED

    LASERHIT B3 target (scaled) and a LASERHIT Training Kit.

    Alternatively, print a free B3 target, use your own laser cartridge or laser training device, and mount a smartphone on a tripod.

    No rifle optics are required. You may use a red dot, EOTech, LPVO, or iron sights.

    ‍ ‍

    NOTES

    [1] Range refers to the real-world distance defined for the drill. Firing Range is the actual indoor distance and is calculated automatically based on target scale before training begins.

    [2] The LASERHIT B3 target at a 1:10 scale is recommended; other genuine LASERHIT targets may also be used.

    [3] When using custom targets, use a solid, dark target surface for best detection. A LASERHIT reload mark is needed and can be downloaded for free from the LaserHIT website (laserhit.com/targets). Set the correct Target Scale during Firing Range setup before starting the drill.

    ‍ ‍

    DRILL DETAILS

    This drill builds practical rifle precision at a benchmark distance commonly used in patrol rifle training and qualification. Many law enforcement programs include 25-yard rifle shooting and treat it as a non-negotiable standard for center-mass accountability.

    The drill may be performed standing, supported, or from a stable position, with the emphasis on precision and consistency rather than position-specific technique. A sub-6-inch group reinforces disciplined fundamentals and confirms the shooter’s ability to place controlled hits where intended before adding speed, movement, or complexity. The short three-shot string makes accuracy repeatable and diagnostic, allowing consistent tracking of performance over time.

 

DRILL PERFORMANCE OVERVIEW

LASERHIT displays group size measured in real-world units (inches), referenced to a 1:1 scale target

    • Group - Target group size for the drill

    • 11.92 - Most recent group size (inches)

    • 50% - Progress toward the goal based on the latest result

    • Bars - Each bar represents one completed stage

    • Grey bar - Goal not met

    • Blue bar - Goal met

    • Goal - Group size under 6 inches

    • Group - Most recent result and change from the previous stage

    • Red number - Indicates regression from the previous stage

    • Green number - Indicates improvement from the previous stage

    • Success - Indicates whether the goal was met in the most recent stage

    • Success Rate - Percentage of stages in which the goal has been met

    • Down Time - Time elapsed since the last stage was completed