Rifle Drills
For iPhone and iPad
Practical Precision
Goal: group < 6 inch at 25 yards, 3 shots
-
Practice: FREE TARGET • ADVANCED
Target: LASERHIT B3
Target Scale: 1:10
Firing Range: 2.5 yards
Stage: 3 shots
Goal: Group < 6-inch
-
DISCLAIMER
Custom targets are supported. See Notes [3] for requirements.
OBJECTIVE
Fire three shots at center mass. Time limit: 3 minutes. Range: 25 yards (see Notes [1]).
GOAL
Achieve a group under 6 inches at 25 yards. Accountability before speed.
WHAT YOU NEED
LASERHIT B3 target (scaled) and a LASERHIT Training Kit.
Alternatively, print a free B3 target, use your own laser cartridge or laser training device, and mount a smartphone on a tripod.
No rifle optics are required. You may use a red dot, EOTech, LPVO, or iron sights.
NOTES
[1] Range refers to the real-world distance defined for the drill. Firing Range is the actual indoor distance and is calculated automatically based on target scale before training begins.
[2] The LASERHIT B3 target at a 1:10 scale is recommended; other genuine LASERHIT targets may also be used.
[3] When using custom targets, use a solid, dark target surface for best detection. A LASERHIT reload mark is needed and can be downloaded for free from the LaserHIT website (laserhit.com/targets). Set the correct Target Scale during Firing Range setup before starting the drill.
DRILL DETAILS
This drill builds practical rifle precision at a benchmark distance commonly used in patrol rifle training and qualification. Many law enforcement programs include 25-yard rifle shooting and treat it as a non-negotiable standard for center-mass accountability.
The drill may be performed standing, supported, or from a stable position, with the emphasis on precision and consistency rather than position-specific technique. A sub-6-inch group reinforces disciplined fundamentals and confirms the shooter’s ability to place controlled hits where intended before adding speed, movement, or complexity. The short three-shot string makes accuracy repeatable and diagnostic, allowing consistent tracking of performance over time.
DRILL PERFORMANCE OVERVIEW
LASERHIT displays group size measured in real-world units (inches), referenced to a 1:1 scale target
-
Group - Target group size for the drill
11.92 - Most recent group size (inches)
50% - Progress toward the goal based on the latest result
Bars - Each bar represents one completed stage
Grey bar - Goal not met
Blue bar - Goal met
-
Goal - Group size under 6 inches
Group - Most recent result and change from the previous stage
Red number - Indicates regression from the previous stage
Green number - Indicates improvement from the previous stage
Success - Indicates whether the goal was met in the most recent stage
Success Rate - Percentage of stages in which the goal has been met
Down Time - Time elapsed since the last stage was completed
Practical Accuracy
Goal: Accuracy < 3 inch at 25 yards, 3 shots
-
Practice: FREE TARGET • ADVANCED
Target: LASERHIT B3
Target Scale: 1:10
Firing Range: 2.5 yards
Stage: 3 shots
Goal: Accuracy < 3-inch
-
DISCLAIMER
Your own targets are supported. See Notes [3] for requirements.
OBJECTIVE
Use a crosshair overlay on the target center mass. Fire three shots as close to the crosshair center as possible. Time limit: 3 minutes. Range: 25 yards (see Notes [1]).",
GOAL
Achieve a Accuracy under 3 inches. Accuracy before speed.
WHAT YOU NEED
LASERHIT B3 target (scaled) and a LASERHIT Training Kit.
Alternatively, print a free B3 target, use your own laser cartridge or laser training device, and mount a smartphone on a tripod.
No rifle optics are required. You may use a red dot, EOTech, LPVO, or iron sights.
NOTES
[1] Range refers to the real-world distance defined for the drill. Firing Range is the actual indoor distance and is calculated automatically based on target scale before training begins.
[2] The LASERHIT B3 target at a 1:10 scale is recommended; other genuine LASERHIT targets may also be used.
[3] When using your own targets, use a solid, dark target surface for best detection. A LASERHIT reload mark is needed and can be downloaded for free from the LaserHIT website (laserhit.com/targets). Set the correct Target Scale during Firing Range setup before starting the drill.
Laser Zeroing (Recommended)
For best accuracy, perform Laser Zeroing for each drill.
At the Cease Fire state, tap the crosshair icon in the top panel. Align the crosshair with your point of aim and follow the on-screen prompts to register three zeroing shots.
Once confirmed, LASERHIT applies this adjustment to all hits in the drill. Re-zero whenever you change firearms, remove the laser cartridge, or adjust your setup.
DRILL DETAILS
This drill builds practical rifle accuracy by evaluating deviation from the intended point of aim rather than group size. During Express Setup (Step 2), the shooter must manually position the crosshairs precisely at the intended aim point on the target to establish a correct reference. Accurate rifle shooting depends on consistent alignment between point of aim and point of impact, supported by fundamentals such as sight alignment, sight picture, trigger control, and stability. Measuring windage (left/right) and elevation (up/down) relative to the crosshair center exposes even subtle inconsistencies in technique and helps diagnose errors early. The short three-shot string provides efficient, repeatable feedback, allowing focused refinement of precision and consistency without unnecessary time or ammunition expenditure. This type of offset-based evaluation is widely used in rifle marksmanship training to reinforce disciplined fundamentals and exact shot placement.
DRILL PERFORMANCE OVERVIEW
LASERHIT displays windage and elevation for each shot and calculates the Accuracy (inches) once the stage is completed.
-
Accuracy - Deviation from the crosshair center
14.33 - Most recent Accuracy (inches)
21% - Progress toward the goal based on the latest result
Bars - Each bar represents one completed stage
Grey bar - Goal not met
Blue bar - Goal met
-
Goal - Accuracy under 3 inches
Accuracy - Most recent result and change from the previous stage
Red number - Indicates regression from the previous stage
Green number - Indicates improvement from the previous stage
Success - Indicates whether the goal was met in the most recent stage
Success Rate - Percentage of stages in which the goal has been met
Down Time - Time elapsed since the last stage was completed
Ultimate Precision
Goal: Group < 1-inch at 25 yards, 10 shots
-
Practice: FREE TARGET • ADVANCED
Target: LASERHIT B3
Target Scale: 1:10
Firing Range: 2.5 yards
Stage: 10 shots
Goal: Group < 1-inch
-
DISCLAIMER
Your own targets are supported. See Notes [3] for requirements.
OBJECTIVE
Fire 10 shots at center mass. Time limit: 3 minutes. Range: 25 yards (see Notes [1]).
GOAL
Achieve a sub-1-inch group. Repeatable precision under control.
WHAT YOU NEED
LASERHIT B3 target (scaled) and a LASERHIT Training Kit.
Alternatively, print a free B3 target, use your own laser cartridge or laser training device, and mount a smartphone on a tripod.
No rifle optics are required. You may use a red dot, EOTech, LPVO, or iron sights.
NOTES
[1] Range refers to the real-world distance defined for the drill. Firing Range is the actual indoor distance and is calculated automatically based on target scale before training begins.
[2] The LASERHIT B3 target at a 1:10 scale is recommended; other genuine LASERHIT targets may also be used.
[3] When using custom targets, use a solid, dark target surface for best detection. A LASERHIT reload mark is needed and can be downloaded for free from the LaserHIT website (laserhit.com/targets). Set the correct Target Scale during Firing Range setup before starting the drill.
DRILL DETAILS
This drill develops extreme rifle precision by emphasizing tight, repeatable group control under consistent conditions.
Group size is measured as the distance between the two most distant shot impacts and serves as a clear indicator of marksmanship fundamentals such as stability, sight alignment, trigger control, and follow-through.
Achieving a sub-1-inch group at a Range of 25 yards requires refined fundamentals and equipment consistency, providing measurable feedback on accuracy development over time. This drill establishes a precision benchmark before introducing speed, movement, or positional complexity. Shooters may further challenge themselves by using alternative positions such as kneeling or tripod-supported.
DRILL PERFORMANCE OVERVIEW
LASERHIT displays group size measured in real-world units (inches), referenced to a 1:1 scale target.
-
Group - Target group size for the drill
0.39 - Most recent group size (inches)
100% - Progress toward the goal based on the latest result
Bars - Each bar represents one completed stage
Grey bar - Goal not met
Blue bar - Goal met
-
Goal - Group size under 1 inch
Group - Most recent result and change from the previous stage
Red number - Indicates regression from the previous stage
Green number - Indicates improvement from the previous stage
Success - Indicates whether the goal was met in the most recent stage
Success Rate - Percentage of stages in which the goal has been met
Down Time - Time elapsed since the last stage was completed
Ultimate Accuracy
Goal: Accuracy < 0.5 inch at 25 yards, 10 shots
-
Practice: FREE TARGET • ADVANCED
Target: LASERHIT B3
Target Scale: 1:10
Firing Range: 2.5 yards
Stage: 10 shots
Goal: Accuracy < 0.5-inch
-
Use a crosshair overlay on the target center mass. Fire 10 shots at the crosshair center. Time limit: 3 minutes. Range: 25 yards (see Notes [1]).
GOAL
Achieve a Accuracy under 0.5 inch. Controlled perfection and mastered confidence.
WHAT YOU NEED
LASERHIT B3 target (scaled) and a LASERHIT Training Kit.
Alternatively, print a free B3 target, use your own laser cartridge or laser training device, and mount a smartphone on a tripod.
No rifle optics are required. You may use a red dot, EOTech, LPVO, or iron sights.
NOTES
[1] Range refers to the real-world distance defined for the drill. Firing Range is the actual indoor distance and is calculated automatically based on target scale before training begins.
[2] The LASERHIT B3 target at a 1:10 scale is recommended; other genuine LASERHIT targets may also be used.
[3] When using custom targets, use a solid, dark target surface for best detection. A LASERHIT reload mark is needed and can be downloaded for free from the LaserHIT website (laserhit.com/targets). Set the correct Target Scale during Firing Range setup before starting the drill.
Laser Zeroing (Recommended)
For best accuracy, perform Laser Zeroing for each drill. At the Cease Fire state, tap the crosshair icon in the top panel. Align the crosshair with your point of aim and follow the on-screen prompts to register three zeroing shots. Once confirmed, LASERHIT applies this adjustment to all hits in the drill. Re-zero whenever you change firearms, remove the laser cartridge, or adjust your setup.
DRILL DETAILS
This drill develops ultimate rifle accuracy by measuring deviation from the exact point of aim. During Express Setup (Step 2), the shooter must manually position the crosshairs precisely at the intended aim point on the target to establish a true reference.
Unlike group-based drills that evaluate how tightly shots cluster, this drill evaluates how precisely each shot lands relative to the crosshair center. Measuring offset exposes zero error, shooter bias, and subtle inconsistencies in sight alignment, trigger control, and follow-through.
An Accuracy under 0.5 inch at a Range of 25 yards represents mastered fundamentals and disciplined execution. This level of accuracy builds confidence in shot predictability and serves as a final confirmation of control before introducing speed, movement, or positional complexity.
DRILL PERFORMANCE OVERVIEW
After each shot, LASERHIT displays windage (left/right) and elevation (up/down) in real-world units (inches). Once all shots are completed, LASERHIT calculates the Accuracy for the stage.
-
Accuracy - Deviation from the crosshair center
0.33 - Most recent Accuracy (inches)
100% - Progress toward the goal based on the latest result
Bars - Each bar represents one completed stage
Grey bar - Goal not met
Blue bar - Goal met
-
Goal - Accuracy under 0.5 inch
Accuracy - Most recent result and change from the previous stage
Red number - Indicates regression from the previous stage
Green number - Indicates improvement from the previous stage
Success - Indicates whether the goal was met in the most recent stage
Success Rate - Percentage of stages in which the goal has been met
Down Time - Time elapsed since the last stage was completed
Home Defense
Goal: 3 shots to A-torso at 10 yards
-
Practice: BLACK STEEL • ADVANCED
Target: LASERHIT B3
Target Scale: 1:4
Firing Range: 2.5 yards
Stage: 3 shots
Goal: 3 hits to A-torso
-
DISCLAIMER
Your own custom targets are not supported. This drill requires LASERHIT B3-type targets.
OBJECTIVE
Fire three shots at center mass. Time limit: 3 minutes. Range: 10 yards (see Notes [1]).
GOAL
Hit to A-torso three times. Control the rifle when distance disappears.
WHAT YOU NEED
LASERHIT B3 target (scaled) and a LASERHIT Training Kit.
Alternatively, print a free B3 target, use your own laser cartridge or laser training device, and mount a smartphone on a tripod.
No rifle optics are required. You may use a red dot, EOTech, LPVO, or iron sights.
NOTES
[1] Range refers to the real-world distance defined for the drill. Firing Range is the actual indoor distance and is calculated automatically based on target scale before training begins.
[2] The LASERHIT B3 target at a 1:4 scale is recommended; other supported LASERHIT B3 variants may also be used.
DRILL DETAILS
This drill is designed for close-quarters rifle use in confined home-defense environments where distances collapse and reaction time is limited. At very short distances, mechanical offset, muzzle control, and disciplined shot placement become critical, even with a rifle. This drill reinforces immediate center-mass accountability and control under proximity stress, requiring the shooter to manage height-over-bore, maintain proper sight alignment, and deliver controlled hits despite minimal distance to the target. The emphasis is not speed alone, but confident, accountable execution when space is limited and mistakes carry greater consequences.
DRILL PERFORMANCE OVERVIEW
This section shows how closely your results align with the drill goal.
-
Hits - The scoring points used for the drill
3 - Most recent A-torso hit count
100% - Progress toward the goal based on the latest result
Bars - Each bar represents one completed stage
Grey bar - Goal not met
Red bar - Goal met
-
Goal - Score three points by firing to A-torso
Hits - Most recent result and change from the previous stage
Red number - Indicates regression from the previous stage
Green number - Indicates improvement from the previous stage
Success - Indicates whether the goal was met in the most recent stage
Success Rate - Percentage of stages in which the goal has been met
Down Time - Time elapsed since the last stage was completed