1. Read SETTINGS and OBJECTIVE

2. Start the LASERHIT app and proceed to FREE TARGET practice

3. Edit the FIRING RANGE SETUP accordingly

4. Start practicing and follow the OBJECTIVE

• Target Type: LASERHIT B3

• Target Scale: 1:10

• Practice: FREE TARGET

FIRING RANGE SETUP

• Settings Level: ADVANCED

• Firing Distance: 2.5 yards

• Units: Inch

On-Screen Results

• Group: Show

• Windage-Elevation,inch: Hide

Virtual Spotter: Off

Target Settings

• Vital Zone Radius, inch: 6

Common Settings

• Hits, max.: 3

• Timeout, sec.: 180 sec

DISCLAIMER: Custom targets are supported. See Notes [3] for requirements.

OBJECTIVE

Fire 3 shots at center mass. Time limit: 3 minutes. Range: 25 yards (see Notes [1]).

GOAL

Achieve a group under 6 inches at 25 yards. Accountability before speed.

WHAT YOU NEED

LASERHIT B3 target (scaled) and a LASERHIT Training Kit.

Alternatively, print a free B3 target, use your own laser cartridge or laser training device, and mount a smartphone on a tripod.

Use your AR-15, shotgun, or other compatible firearm.

No rifle scope is required. You may use a red dot, EOTech, LPVO, or iron sights.

‍ ‍

NOTES

[1] Firing Distance is the actual indoor distance. Simulated Distance calculated automatically based on target scale before training begins.

[2] The LASERHIT B3 target at a 1:10 scale is recommended; other genuine LASERHIT targets may also be used. You can purchase the Handgun Drills set at

www.laserhit.com/products/handgun-drills-target-set

[3] When using custom targets, use a solid, dark target surface for best detection. A LASERHIT reload mark is needed and can be downloaded for free from the LaserHIT website (laserhit.com/targets). Set the correct Target Scale during Firing Range setup before starting the drill.

‍ ‍

DRILL DETAILS

This drill builds practical rifle precision at a benchmark distance commonly used in patrol rifle training and qualification. Many law enforcement programs include 25-yard rifle shooting and treat it as a non-negotiable standard for center-mass accountability.

The drill may be performed standing, supported, or from a stable position, with the emphasis on precision and consistency rather than position-specific technique. A sub-6-inch group reinforces disciplined fundamentals and confirms the shooter’s ability to place controlled hits where intended before adding speed, movement, or complexity. The short three-shot string makes accuracy repeatable and diagnostic, allowing consistent tracking of performance over time.

1. Read SETTINGS and OBJECTIVE

2. Start the LASERHIT app and proceed to FREE TARGET practice

3. Edit the FIRING RANGE SETUP accordingly

4. Start practicing and follow the OBJECTIVE

• Target Type: LASERHIT B3

• Target Scale: 1:10

• Practice: FREE TARGET

FIRING RANGE SETUP

• Settings Level: ADVANCED

• Firing Distance: 2.5 yards

• Units: Inch

On-Screen Results

• Group: Hide

• Windage-Elevation,inch: Show

Virtual Spotter: Hit Placement

Target Settings

• Vital Zone Radius, inch: 3

Common Settings

• Hits, max.: 3

• Timeout, sec.: 180 sec

DISCLAIMER: Your own targets are supported. See Notes [3] for requirements.

‍ ‍

OBJECTIVE

Use a crosshair overlay on the target center mass. Fire three shots as close to the crosshair center as possible. Time limit: 3 minutes. Range: 25 yards (see Notes [1]).

GOAL

Achieve a Accuracy under 3 inches. Accuracy before speed.

‍ ‍

WHAT YOU NEED

LASERHIT B3 target (scaled) and a LASERHIT Training Kit.

Alternatively, print a free B3 target, use your own laser cartridge or laser training device, and mount a smartphone on a tripod.

Use your AR-15, shotgun, or other compatible firearm.

No rifle scope is required. You may use a red dot, EOTech, LPVO, or iron sights.

NOTES

[1] Firing Distance is the actual indoor distance. Simulated Distance calculated automatically based on target scale before training begins.

[2] The LASERHIT B3 target at a 1:10 scale is recommended; other genuine LASERHIT targets may also be used. You can purchase the Handgun Drills set at

www.laserhit.com/products/handgun-drills-target-set

[3] When using your own targets, use a solid, dark target surface for best detection. A LASERHIT reload mark is needed and can be downloaded for free from the LaserHIT website (laserhit.com/targets). Set the correct Target Scale during Firing Range setup before starting the drill.

‍ ‍

‍ ‍

DRILL DETAILS

This drill builds practical rifle accuracy by evaluating deviation from the intended point of aim rather than group size. During Express Setup (Step 2), the shooter must manually position the crosshairs precisely at the intended aim point on the target to establish a correct reference. Accurate rifle shooting depends on consistent alignment between point of aim and point of impact, supported by fundamentals such as sight alignment, sight picture, trigger control, and stability. Measuring windage (left/right) and elevation (up/down) relative to the crosshair center exposes even subtle inconsistencies in technique and helps diagnose errors early. The short three-shot string provides efficient, repeatable feedback, allowing focused refinement of precision and consistency without unnecessary time or ammunition expenditure. This type of offset-based evaluation is widely used in rifle marksmanship training to reinforce disciplined fundamentals and exact shot placement.

1. Read SETTINGS and OBJECTIVE

2. Start the LASERHIT app and proceed to FREE TARGET practice

3. Edit the FIRING RANGE SETUP accordingly

4. Start practicing and follow the OBJECTIVE

• Target Type: LASERHIT B3

• Target Scale: 1:10

• Practice: FREE TARGET

FIRING RANGE SETUP

• Settings Level: ADVANCED

• Firing Distance: 2.5 yards

• Units: Inch

On-Screen Results

• Group: Show

• Windage-Elevation,inch: Hide

Virtual Spotter: Off

Target Settings

• Vital Zone Radius, inch: 1

Common Settings

• Hits, max.: 10

• Timeout, sec.: 180 sec

DISCLAIMER: Your own targets are supported. See Notes [3] for requirements.

‍ ‍

OBJECTIVE

Fire 10 shots at center mass. Time limit: 3 minutes. Range: 25 yards (see Notes [1]).

GOAL

Achieve a sub-1-inch group. Repeatable precision under control.

WHAT YOU NEED

LASERHIT B3 target (scaled) and a LASERHIT Training Kit.

Alternatively, print a free B3 target, use your own laser cartridge or laser training device, and mount a smartphone on a tripod.

Use your AR-15, shotgun, or other compatible firearm.

No rifle scope is required. You may use a red dot, EOTech, LPVO, or iron sights.

NOTES

[1] Firing Distance is the actual indoor distance. Simulated Distance calculated automatically based on target scale before training begins.

[2] The LASERHIT B3 target at a 1:10 scale is recommended; other genuine LASERHIT targets may also be used. You can purchase the Handgun Drills set at

www.laserhit.com/products/handgun-drills-target-set

[3] When using custom targets, use a solid, dark target surface for best detection. A LASERHIT reload mark is needed and can be downloaded for free from the LaserHIT website (laserhit.com/targets). Set the correct Target Scale during Firing Range setup before starting the drill.

DRILL DETAILS

This drill develops extreme rifle precision by emphasizing tight, repeatable group control under consistent conditions.

Group size is measured as the distance between the two most distant shot impacts and serves as a clear indicator of marksmanship fundamentals such as stability, sight alignment, trigger control, and follow-through.

Achieving a sub-1-inch group at a Range of 25 yards requires refined fundamentals and equipment consistency, providing measurable feedback on accuracy development over time. This drill establishes a precision benchmark before introducing speed, movement, or positional complexity. Shooters may further challenge themselves by using alternative positions such as kneeling or tripod-supported.

1. Read SETTINGS and OBJECTIVE

2. Start the LASERHIT app and proceed to FREE TARGET practice

3. Edit the FIRING RANGE SETUP accordingly

4. Start practicing and follow the OBJECTIVE

• Target Type: LASERHIT B3

• Target Scale: 1:10

• Practice: FREE TARGET

FIRING RANGE SETUP

• Settings Level: ADVANCED

• Firing Distance: 2.5 yards

• Units: Inch

On-Screen Results

• Group: Hide

• Windage-Elevation,inch: Show

Virtual Spotter: Hit Placement

Target Settings

• Vital Zone Radius, inch: 0.5

Common Settings

• Hits, max.: 10

• Timeout, sec.: 180 sec

DISCLAIMER: Your own targets are supported. See Notes [3] for requirements.

OBJECTIVE

Use a crosshair overlay on the target center mass. Fire 10 shots at the crosshair center. Time limit: 3 minutes. Range: 25 yards (see Notes [1]).

GOAL

Achieve a Accuracy under 0.5 inch. Controlled perfection and mastered confidence.

‍ ‍

WHAT YOU NEED

LASERHIT B3 target (scaled) and a LASERHIT Training Kit.

Alternatively, print a free B3 target, use your own laser cartridge or laser training device, and mount a smartphone on a tripod.

Use your AR-15, shotgun, or other compatible firearm.

No rifle scope is required. You may use a red dot, EOTech, LPVO, or iron sights.

‍ ‍

NOTES

[1] Firing Distance is the actual indoor distance. Simulated Distance calculated automatically based on target scale before training begins.

[2] The LASERHIT B3 target at a 1:10 scale is recommended; other genuine LASERHIT targets may also be used. You can purchase the Handgun Drills set at

www.laserhit.com/products/handgun-drills-target-set

[3] When using custom targets, use a solid, dark target surface for best detection. A LASERHIT reload mark is needed and can be downloaded for free from the LaserHIT website (laserhit.com/targets). Set the correct Target Scale during Firing Range setup before starting the drill.

‍ ‍

DRILL DETAILS

This drill develops ultimate rifle accuracy by measuring deviation from the exact point of aim. During Express Setup (Step 2), the shooter must manually position the crosshairs precisely at the intended aim point on the target to establish a true reference.

Unlike group-based drills that evaluate how tightly shots cluster, this drill evaluates how precisely each shot lands relative to the crosshair center. Measuring offset exposes zero error, shooter bias, and subtle inconsistencies in sight alignment, trigger control, and follow-through.

An Accuracy under 0.5 inch at a Range of 25 yards represents mastered fundamentals and disciplined execution. This level of accuracy builds confidence in shot predictability and serves as a final confirmation of control before introducing speed, movement, or positional complexity.

1. Read SETTINGS and OBJECTIVE

2. Start the LASERHIT app and proceed to BLACK STEEL practice

3. Edit the FIRING RANGE SETUP accordingly

4. Start practicing and follow the OBJECTIVE

• Target Type: LASERHIT B3

• Target Scale: 1:4

• Practice: BLACK STEEL

FIRING RANGE SETUP

• Settings Level: ADVANCED

• Firing Distance: 2.5 yards

• Units: Inch

On-Screen Results

• Target Index: Hide

• Hits on Target: Hide

• Range: Hide

• Target Zone: Show

• Group,inch: Show

• Windage-Elevation: Hide

• Elapsed Time: Show

• Split Time: Hide

• Highlight Best Results: No

Virtual Spotter: Off

Session Results

• Total Time: On

• Target Hit: Off

• Hits on Target: Off

• Hits Overlap: Off

• Target Zones: On

• Group, inch: On

• Range, yards: Off

Common Settings

• Digital Zoom: Off

• Hits, max.: 3

• Timeout, sec.: 180 sec

DISCLAIMER: Your own custom targets are not supported. This drill requires LASERHIT B3-type targets.

OBJECTIVE

Fire three shots at center mass. Time limit: 3 minutes. Range: 10 yards (see Notes [1]).

GOAL

Hit to A-torso three times. Control the rifle when distance disappears.

WHAT YOU NEED

LASERHIT B3 target (scaled) and a LASERHIT Training Kit.

Alternatively, print a free B3 target, use your own laser cartridge or laser training device, and mount a smartphone on a tripod.

Use your AR-15, shotgun, or other compatible firearm.

No rifle scope is required. You may use a red dot, EOTech, LPVO, or iron sights.

‍ ‍

NOTES

[1] Firing Distance is the actual indoor distance. Simulated Distance calculated automatically based on target scale before training begins.

[2] The LASERHIT B3 target at a 1:4 scale is recommended; other supported LASERHIT B3 variants may also be used.

‍ ‍

DRILL DETAILS

This drill is designed for close-quarters rifle use in confined home-defense environments where distances collapse and reaction time is limited. At very short distances, mechanical offset, muzzle control, and disciplined shot placement become critical, even with a rifle.

This drill reinforces immediate center-mass accountability and control under proximity stress, requiring the shooter to manage height-over-bore, maintain proper sight alignment, and deliver controlled hits despite minimal distance to the target. The emphasis is not speed alone, but confident, accountable execution when space is limited and mistakes carry greater consequences.